Flooring glue - Parquet glue
Manufacturer: STAUF Klebewerk GmbH
EMICODE: EC1-R plus
GISCODE: RS10
Characteristics: suitable for solid boards, multi-layer parquet
Application: It must be ensured that the sub floor is ready for installation by performing proper sub floor preparation, floors must be clean, have sufficient surface strength, must be level, permanently dry and free of cracks. If necessary, make sure sub floors are level, have sufficient absorptive capacity and grip by applying the appropriate STAUF levelling compound. Then apply adhesive to sub floor using the appropriate STAUF notched trowel, avoid adhesive pooling and excessive layer thickness by evenly raking the notched trowel over adhesive layer. Install wood flooring during specified open time, slide in and press down firmly. In particular with raw wood flooring, avoided pushing adhesive into joints. Depending on the degree of setting, adhesive residues can be removed with the appropriate STAUF cleaners. Please test the effect of the cleaner on the finish of the wood flooring in an inconspicuous area or on a sample prior to applying the cleaner. Hardened adhesive residues can easily be removed mechanically, mostly residue-free. However, longer exposures on finished wood flooring should be avoided to prevent possible contouring.
Other information: The foregoing representations are based on the results of our most current product and material testing and are of a non-obligatory advisory nature only since we have no control over the actual quality of workmanship, materials used and worksite conditions. As such, they do not constitute an express or implied warranty of any kind. The same applies to our commercial and technical consultation services which are provided free-of-charge and without obligation. Therefore, we strongly recommend that prior on-site testing be conducted to observe and study the suitability of the product for the intended purpose. With the release of this technical information, all prior technical information (technical data sheets, installation recommendations and other information regarding similar purposes) becomes invalid.
"How much glue do I need for my floor?"
Formula: m² x 1.3 / Y = bucket
1) m² = the area covered with floorboards.
2) 1.3 = approx. Adhesive kg / m²
3) Y = packing unit
Example: The floorboard area is 46m²
1) 46 m2 x 1.3 = 59.80
2) 59.80 / 8 = 7,475 bucket
Since you can not buy 7.475 buckets, you should purchase 8 buckets. That is 64 kg
Unfortunately there are no review yet. Be the first who rate this product.
